- Store vehicles in your garage
- Get product recommendations
- Easily find products and accessories
High Output Stator for Kawasaki KFX 700 | KVF 650 750 Brute Force / Prairie | Suzuki LTV 700 2002-2013 | # 21003-0012
High Output Stator for Kawasaki KFX 700 | KVF 650 750 Brute Force / Prairie | Suzuki LTV 700 2002-2013 | # 21003-0012
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Details
Details
Brand new high output aftermarket stator
- Direct replacement to your original unit
- Connector included
- Opposite connector included
- Rubber grommet included
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- All product shipped are tested
20% More output over stock, works with all other OEM components.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Specifications
Specifications
Interior diameter: 53 mm
Exterior diameter: 114 mm
Thickness: 14 mm
Length of wires stator to grommet: 320 mm
Length of wires grommet to plug: 870 mm
Other specifications:
Number of wires: 3
Number of plugs: 1
Number of pins: 3
Number of poles: 18
Wire to wire resistance:
Alternator: Yellow to Yellow = 0.7 ohms +-20%
Interchange Part Nº
Interchange Part Nº
- 21003-0093
- 21003-0012
- 21003-0003
- 21003-0092
- 21003-1359
- K2100-31359
Installation
Installation
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code then youメre original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010メメ.
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Vehicle Fitments
Vehicle Fitments
Let customers speak for us
Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.
