- Store vehicles in your garage
- Get product recommendations
- Easily find products and accessories
Regulator for Suzuki DR 650 SE | Yamaha FZ6 / R 600 | FZR / YZF 600 | YZF R1 / R3 / R6 / R6S 1995-2024 | 4JH-81960-00-00
RMSTATOR
SKU: RM30Y01
In Stock
RMSTATOR
Regulator for Suzuki DR 650 SE | Yamaha FZ6 / R 600 | FZR / YZF 600 | YZF R1 / R3 / R6 / R6S 1995-2024 | 4JH-81960-00-00
Close
FITMENT WARNING:
Close
Close
Shop By Vehicle
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Read more
Regulator for Suzuki DR 650 SE | Yamaha FZ6 / R 600 | FZR / YZF 600 | YZF R1 / R3 / R6 / R6S 1995-2024 | 4JH-81960-00-00
Details
Details
Brand new voltage regulator rectifier
- Direct replacement to your original unit.
- Plug-and-play, direct fit, easy installation.
- No assembly required
- The Quality exceeds the OEM equipment
- Improved heat sink and charging capabilities
- Higher grade of electric components.
- All products shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Specifications
Specifications
Dimensions :
Width : 80mm
Length : 90mm
Height: 28mm
Fixation holes center to center : 70mm
Other specifications :
Number of plugs : 1
Number of pins : 5
Width : 80mm
Length : 90mm
Height: 28mm
Fixation holes center to center : 70mm
Other specifications :
Number of plugs : 1
Number of pins : 5
Interchange Part Nº
Interchange Part Nº
- 4JH-81960-01-00
- 5SL-81960-00-00
- 32800-32E00
- 5VX-81960-00-00
- 4JH-81960-00-00
- 1WD-H1960-00-00
Installation
Installation
Before installing your new regulator/rectifier;
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Vehicle Fitments
Vehicle Fitments
Vehicle Fitments
Recently Viewed
You may also like
Have a question?
Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.
