Kit Stator + CDI Box for Arctic Cat Jag 340 440 | Panther 440 500 | El Tigre 6000 530 | 1984-1997 | 3005-375 / 3005-066

Kit Stator + CDI Box for Arctic Cat Jag 340 440 | Panther 440 500 | El Tigre 6000 530 | 1984-1997 | 3005-375 / 3005-066

Name: Kit Stator + CDI Box for Arctic Cat Jag 340 440 | Panther 440 500 | El Tigre 6000 530 | 1984-1997 | 3005-375 / 3005-066
Brand: RMSTATOR
SKU: RMS900-108218
Price: 293.78 USD
Availability: InStock

RMSTATOR

SKU: RMS900-108218

In Stock

RMSTATOR

Kit Stator + CDI Box for Arctic Cat Jag 340 440 | Panther 440 500 | El Tigre 6000 530 | 1984-1997 | 3005-375 / 3005-066

$293.78

This product fits your

Close

FITMENT WARNING:

This product does not fit your

Close

This product is ride specific

Close

Shop By Vehicle

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

We highly recommend replacing the voltage regulator rectifier at the same time as the CDI unit. It is the reason for CDI failures. These units are triple tested at the factory to make sure they perform properly.

Brand new aftermarket stator + CDI Box

All product shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Stator :

Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade of lamination materials
Highest grade of copper winding, resistant to 200 degrees Celsius.
Connector included
Back Plate included

Note : There are 2 possible stators for the OEM 3005-346, please compare your original part with our picture.

CDI Box :

Our PeakRPM CDI Box provides the optimal output for your ride
Enjoy fast & easy installation with our plug & play OEM design
OEM-grade electronic components and printed circuit boards for long-term reliability and performance
90% of ignition issues are caused by a faulty stator. Fully test ignition components before buying

Specifications

Stator :

Dimensions :
Interior diameter: 40 mm
Exterior diameter: 113 mm
Thickness: 18 mm
Length of wires stator to plug: 240 mm

Other specifications :
Number of wires: 8
Number of plugs: 2
Number of pins: 8

Wire to wire resistance :
Alternator: Yellow to Yellow = 0.5 ohms +/-20%
Source: Black/Red to Black/White = 200 ohms +/-20%
Source 2: White/Red to Black/Red = 20 ohms +/-20%

CDI Box :

Dimensions:
Height: 40.5 mm
Length: 65 mm
Width: 93 mm
Distance between fixation holes: 74 mm

Other specifications:
Number of plugs: 3
Number of pins: 6

Please note: The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box.

Interchange Part Nº

108218-R00

Installation

Before installing your new Stator + CDI Box

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors

Our parts may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator + CDI box are designed as a direct plug-in replacements and should be used as such.

When bolting stator in, always use locking compound.

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments

Vehicle Fitments