- Store vehicles in your garage
- Get product recommendations
- Easily find products and accessories
Kit Stator + Regulator for Polaris 600 Racer 2021-2023 | 600 800 Switchback / Rush Pro-S 2015-2020 | OEM# 4013413 / 4015642
Kit Stator + Regulator for Polaris 600 Racer 2021-2023 | 600 800 Switchback / Rush Pro-S 2015-2020 | OEM# 4013413 / 4015642
Battery condition is important. No stator or regulator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Details
Details
Brand new aftermarket Stator + Regulator
- Direct replacements to your original unit
- Plug-and-play, direct fit, easy installation
- All products shipped are tested
- All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Stator :
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
Regulator :
- No assembly required
- Higher grade of electric components
- The quality exceeds the OEM equipment
Specifications
Specifications
Dimensions :
Interior diameter : 54 mm
Exterior diameter : 120 mm
Thickness : 24 mm
Length of wires stator to grommet : 50 mm
Length of wires grommet to plug : 450 mm
Length of pickup coil's wire to grommet : 100 mm
Other specifications :
Number of wires : 11
Number of plugs : 2
Number of pins : 11
Number of poles : 18
Wire to wire resistance :
Alternator 3P : Between each yellow = 0.4 ohms +-20%
Alternator 1p #1 : Between each black = 0.4 ohms +-20%
Alternator 1p #2 : Between each orange =0.8 ohms +-20%
Pickup #1: White / Red to White = 200 ohms +-20%
Pickup #2: White / Green to Green = 200 ohms +-20%
Dimensions:
Width: 102 mm
Length: 66 mm
Height: 33 mm
Wires length: 80 mm
Distance between fixation holes center to center: 90 mm
Other specifications:
Number of plugs: 2
Number of pins: 10
Number of wires: 10
Minimum Charging Voltage: 14.5 V +- 0.5 V
Maximum Charging Current: 50 A / 500 W
Open Circuit Voltage: < 15 V
Operation Temperature: -20°C to 85°C
Interchange Part Nº
Interchange Part Nº
-
Stator :
4014958 - 4081430
- 4013413
-
Voltage Regulator :
4014333 - 4015642
Installation
Installation
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Vehicle Fitments
Vehicle Fitments
Let customers speak for us
Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.
