Contact Us
Shop By Vehicle

Kit Flywheel + 140W High Output Stator for Yamaha YFZ 450 2004-2009 2012 2013 OEM# 5TG-81450-00-00 5TG-81410-00-00

RMSTATOR
SKU: RMS900-108124
In Stock
RMSTATOR

Kit Flywheel + 140W High Output Stator for Yamaha YFZ 450 2004-2009 2012 2013 OEM# 5TG-81450-00-00 5TG-81410-00-00

$344.78
This product fits your
Close
FITMENT WARNING:
This product does not fit your
Close
This product is ride specific
Close
Shop By Vehicle

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Read more
Kit Flywheel + 140W High Output Stator for Yamaha YFZ 450 2004-2009 2012 2013 OEM# 5TG-81450-00-00 5TG-81410-00-00
Kit Flywheel + 140W High Output Stator for Yamaha YFZ 450 2004-2009 2012 2013 OEM# 5TG-81450-00-00 5TG-81410-00-00
$344.78
image
image
image
image

Details

Brand New High Output Stator + Magneto Flywheel Rotor

  • Direct replacement to your original unit
  • Pick up pulsar coil included
  • Connector included
  • Opposite connector included
  • Rubber grommet included
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • All products shipped are tested

High output stator generating 140W available for added accessories

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Specifications

Specifications of Stator:

Dimensions:
Interior diameter: 30 mm
Exterior diameter: 84 mm
Thickness: 12 mm
Length of wires stator to grommet: 180 mm
Length of wires grommet to plug: 980 mm
Length of pickup coil's wire to grommet: 95 mm

Other specifications:
Number of wires: 4
Number of plugs: 2
Number of pins: 4

Wire to wire resistance:
Alternator: White to Yellow = 0.3ohms +/-20%
Pickup: White to Red = 264ohms =+/-20%

Specifications of Flywheel:

Dimensions:
Exterior Diameter: 100.4 mm
Interior Diameter: 86.5 mm
Interior Diameter Center Housing: 16 mm
Exterior Diameter Center Housing: 28 mm & 33 mm

Interchange Part Nº

  • Stator :

    5TG-81410-06-00
  • 5TG-81410-02-00
  • 5TG-81410-10-00
  • 5TG-81410-01-00
  • 5TG-81410-05-00
  • 5TG-81410-00-00
  • Flywheel :

    5TG-81450-00-00
  • 5TG-81450-01-00

Installation

Before installing your new magneto flywheel rotor:

Before attempting to start your Yamaha adjusting the air gap is necessary. Rotate the flywheel so the raised node is lined up with the pick up/pulser coil and adjust as close as possible but no less than 0.010".

Before installing your new high output stator:
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code then youメre original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments

Vehicle Fitments
Have a question?

Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.