Kit Stator + Voltage Regulator for Polaris Ranger / Ranger Crew / RZR 4 / RZR 800 2011-2017 | # 4011982 4014034 4012941

Kit Stator + Voltage Regulator for Polaris Ranger / Ranger Crew / RZR 4 / RZR 800 2011-2017 | # 4011982 4014034 4012941

Name: Kit Stator + Voltage Regulator for Polaris Ranger / Ranger Crew / RZR 4 / RZR 800 2011-2017 | # 4011982 4014034 4012941
Brand: RMSTATOR
SKU: RMS900-106169
Price: 335.78 USD
Availability: InStock

RMSTATOR

SKU: RMS900-106169

In Stock

RMSTATOR

Kit Stator + Voltage Regulator for Polaris Ranger / Ranger Crew / RZR 4 / RZR 800 2011-2017 | # 4011982 4014034 4012941

$335.78

This product fits your

Close

FITMENT WARNING:

This product does not fit your

Close

This product is ride specific

Close

Shop By Vehicle

Battery condition is extremely important. No stator, nor regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Brand new aftermarket Stator + Voltage Regulator Rectifier Kit

Direct replacement to your original unit
Plug-and-play, direct fit, easy installation
Highest grade of lamination materials
No assembly required
All shipped products are tested

*All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Stator

Highest grade of copper winding, resistant to 200 degrees Celsius
Rubber grommet included

Voltage regulator rectifier

Improved heat sink and charging capabilities
The quality exceeds the OEM equipment

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

Specifications

Stator Dimensions
Interior diameter : 40 mm
Exterior diameter : 106 mm
Thickness : 24 mm
Length of wires stator to grommet : 45 mm
Length of wires grommet to plug : 100 mm

Other specifications :
Number of wires : 4
Number of plugs : 1
Number of pins : 4

Wire to wire resistance :
Alternator : Yellow to Yellow = 0.4 ohms +/-20%

Voltage regulator rectifier Dimensions
Width : 30 mm
Length : 95 mm
Height: 110 mm
Fixation holes center to center :78 mm

Other specifications :
Number of plugs : 2
Number of pins : 5

Interchange Part Nº

106169-R00

Installation

Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Before installing your new voltage regulator rectifier;

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors.

You will notice that upon installing the voltage regulator rectifier, it is a tight fit

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments

Vehicle Fitments