Contact Us
Shop By Vehicle

Stator for KTM 250 300 SX / XC | Husqvarna TX 300i / TC 250 | Gas Gas EX 300 250 / MC 250 2023-2026 | OEM# A44039404000

RMSTATOR
SKU: RMS010-109222
Out of stock
RMSTATOR

Stator for KTM 250 300 SX / XC | Husqvarna TX 300i / TC 250 | Gas Gas EX 300 250 / MC 250 2023-2026 | OEM# A44039404000

$0.00
Sold out
This product fits your
Close
FITMENT WARNING:
This product does not fit your
Close
This product is ride specific
Close
Shop By Vehicle

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Read more
Stator for KTM 250 300 SX / XC | Husqvarna TX 300i / TC 250 | Gas Gas EX 300 250 / MC 250 2023-2026 | OEM# A44039404000
Stator for KTM 250 300 SX / XC | Husqvarna TX 300i / TC 250 | Gas Gas EX 300 250 / MC 250 2023-2026 | OEM# A44039404000
Sold out
image
image
image

Details

Brand new aftermarket stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Connectors included
  • Rubber grommet included
  • All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Specifications

Dimensions:
Interior diameter: 32 mm
Exterior diameter: 78 mm
Thickness: 15 mm
Length of wires stator to grommet: 75 mm
Length of wires grommet to plug: 610 mm

Other specifications:
Number of wires: 2
Number of plugs: 2
Number of pins: 2
Number of poles: 12
Wire to wire resistance:
Alternator: Yellow to Yellow = 0.4 ohms +/-20%
Alternator: Yellow to ground = O.L

Interchange Part Nº

  • A44039404000

Installation

Before installing your new stator

  • Check the AC output of the stator
  • Replace any burned or corroded connectors on stator and regulator rectifier
  • Check and repair any melted wiring
  • Use hi-temp dielectric grease on all connectors

Our stator might have a different wire color code than your original part.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments

Vehicle Fitments
Have a question?

Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.