Contact Us
Shop By Vehicle

Stator 650W for Can-Am Commander 800 1000 | Outlander / Renegade 570 650 850 1000 2020-2025 | # 420685634 420685922

RMSTATOR
SKU: RMS010-108660
Out of stock
RMSTATOR

Stator 650W for Can-Am Commander 800 1000 | Outlander / Renegade 570 650 850 1000 2020-2025 | # 420685634 420685922

$219.89
Sold out
This product fits your
Close
FITMENT WARNING:
This product does not fit your
Close
This product is ride specific
Close
Shop By Vehicle

Please Note: For some Can-Am models, there are several stator configurations available with varying outputs. Please be sure of which OEM and output your machine needs before purchasing. This part will replace OEMs 420685634 and 420685922 and has an output of 650 watts.

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Read more
Stator 650W for Can-Am Commander 800 1000 | Outlander / Renegade 570 650 850 1000 2020-2025 | # 420685634 420685922
Stator 650W for Can-Am Commander 800 1000 | Outlander / Renegade 570 650 850 1000 2020-2025 | # 420685634 420685922
Sold out
image
image
image
image

Details

Brand new aftermarket 650W stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Connectors included
  • Rubber grommet included
  • All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Specifications

Dimensions:
Interior diameter: 42 mm
Exterior diameter: 115 mm
Thickness: 16 mm
Length of wires stator to grommet: 170 mm
Length of wires grommet to plug: 1500 mm

Other specifications:
Number of wires: 3
Number of plugs: 1
Number of pins: 3
Number of poles: 12
Wire to wire resistance:
Alternator: Yellow to Yellow = 0.3 ohms +/-20%
Alternator: Yellow to ground = O.L

Interchange Part Nº

  • 420685922
  • 420685634

Installation

Before installing your new stator

  • Check the AC output of the stator
  • Replace any burned or corroded connectors on stator and regulator rectifier
  • Check and repair any melted wiring
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments

Vehicle Fitments
Have a question?

Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.