Generator Stator for Polaris 600R Race Carb L/C 2019 2020 | OEM Repl.# 4017431

Generator Stator for Polaris 600R Race Carb L/C 2019 2020 | OEM Repl.# 4017431

Name: Generator Stator for Polaris 600R Race Carb L/C 2019 2020 | OEM Repl.# 4017431
Brand: RMSTATOR
SKU: RMS010-107235
Price: 251.89 USD
Availability: OutOfStock

RMSTATOR

SKU: RMS010-107235

Out of stock

RMSTATOR

Generator Stator for Polaris 600R Race Carb L/C 2019 2020 | OEM Repl.# 4017431

$251.89

Sold out

This product fits your

Close

FITMENT WARNING:

This product does not fit your

Close

This product is ride specific

Close

Shop By Vehicle

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Brand new aftermarket Stator

Direct replacement to your original unit
Plug-and-play, direct fit, easy installation
Highest grade of lamination materials
Highest grade of copper winding, resistant to 200 degrees Celsius
Pick up pulsar coil included
Connectors included
Rubber grommet included
All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Specifications

Dimensions:
Interior diameter: 54 mm
Exterior diameter: 108 mm
Thickness: 20 mm
Length of wires stator to grommet: 130 mm
Length of wires grommet to plug # 1: 150 mm
Length of wires grommet to plug # 2: 120 mm
Length of wires grommet to plug # 3: 250 mm
Length of pickup coil's wire to grommet: 160 mm

Other specifications:
Number of wires: 7
Number of plugs: 3
Number of pins:7
Number of poles: 12
Wire to wire resistance:
Alternator #1: Yellow to Yellow = 0.6 ohms +-20%
Alternator #2: Green to Blue = 0.9 ohms +-20%
Pickup: White to White/Red = 194 ohms +-20%

Interchange Part Nº

4017431

Installation

Before installing your new stator

Check the AC output of the stator
Replace any burned or corroded connectors on stator and regulator rectifier
Check and repair any melted wiring
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments

Vehicle Fitments