Generator Stator for Triumph Street Triple 660 S | Street Triple 675 / R | Street Triple 765 R / RS / S 2007-2020

Generator Stator for Triumph Street Triple 660 S | Street Triple 675 / R | Street Triple 765 R / RS / S 2007-2020

Name: Generator Stator for Triumph Street Triple 660 S | Street Triple 675 / R | Street Triple 765 R / RS / S 2007-2020
Brand: RMSTATOR
SKU: RMS010-106948
Price: 196.89 USD
Availability: InStock

RMSTATOR

SKU: RMS010-106948

In Stock

RMSTATOR

Generator Stator for Triumph Street Triple 660 S | Street Triple 675 / R | Street Triple 765 R / RS / S 2007-2020

$196.89

This product fits your

Close

FITMENT WARNING:

This product does not fit your

Close

This product is ride specific

Close

Shop By Vehicle

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Stator failure on these Triumph motorcycles often affect the voltage regulator at a point where the defective voltage regulator will cause any new stator installed to fail prematurely. We highly recommend to replace your current voltage regulator with our voltage regulator RMS022-105928. Where RMS900-107277 is the kit that fit the models.

Brand new aftermarket Stator

Direct replacement to your original unit
Plug-and-play, direct fit, easy installation
Pick up pulsar coil included
Connectors included
Rubber grommet included
All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Specifications

Dimensions :
Interior diameter : 42 mm
Exterior diameter : 115 mm
Thickness : 16 mm
Length of wires stator to grommet : 250 mm
Length of wires grommet to plug # 1 : 195 mm
Length of wires grommet to plug # 2 : 500 mm
Length of pickup coil's wire to grommet : 280 mm

Other specifications :
Number of wires : 5
Number of plugs : 2
Number of pins : 5
Number of poles : 18

Wire to wire resistance :
Alternator : Between each Black = 0.6 ohms +-20%
Pickup : Green To Grey = 244 ohms +-20%

Interchange Part Nº

T1300057
T1300205

Installation

Before installing your new Stator

Check the AC output of the stator
Replace any burned or corroded connectors on stator and regulator rectifier
Check and repair any melted wiring
Use hi-temp dielectric grease on all connectors

Our stator might have a different wire color code than your original part.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments

Vehicle Fitments