Contact Us
Shop By Vehicle

Stator for Yamaha YZ 250 F 2001-2005 2010-2013 | YZ 400 / YZ 400 F 1998 1999 | YZ 426 F 2000-2002 | YZ 450 F 2003-2005

RMSTATOR
SKU: RMS010-106763
In Stock
RMSTATOR

Stator for Yamaha YZ 250 F 2001-2005 2010-2013 | YZ 400 / YZ 400 F 1998 1999 | YZ 426 F 2000-2002 | YZ 450 F 2003-2005

$152.89
This product fits your
Close
FITMENT WARNING:
This product does not fit your
Close
This product is ride specific
Close
Shop By Vehicle

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Read more
Stator for Yamaha YZ 250 F 2001-2005 2010-2013 | YZ 400 / YZ 400 F 1998 1999 | YZ 426 F 2000-2002 | YZ 450 F 2003-2005
Stator for Yamaha YZ 250 F 2001-2005 2010-2013 | YZ 400 / YZ 400 F 1998 1999 | YZ 426 F 2000-2002 | YZ 450 F 2003-2005
$152.89
image
image
image
image

Details

Brand new aftermarket Stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Pick up pulsar coil included
  • Connectors included
  • Rubber grommet included
  • Back Plate included
  • All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Specifications

Dimensions :
Interior diameter : 28 mm
Exterior diameter : 59.4 mm
Thickness : 8 mm
Length of wires stator to grommet : 40 mm
Length of wires grommet to plug : 530 mm
Length of pickup coil's wire to grommet : 40 mm

Other specifications :
Number of wires : 6
Number of plugs : 1
Number of pins : 6
Number of poles : 4

Wire to wire resistance :
Source Coil 1 : Green to Brown = 860 ohms +-20%
Source Coil 2 : Pink to Black = 55 ohms +-20%
Pickup Coil : Red to White = 290 ohms +-20%

Interchange Part Nº

  • 17D-85560-51-00
  • 5BE-85560-10-00
  • 5BE-85560-02-00
  • 5BE-85560-12-00
  • 5BE-85560-19-00
  • 5XD-85560-09-00
  • 5BE-85560-00-00
  • 17D-85560-50-00
  • 5BE-85560-01-00
  • 5BE-85560-11-00
  • 5SF-85560-00-00
  • 5XD-85560-00-00

Installation

Before installing your new stator

  • Check the AC output of the stator
  • Replace any burned or corroded connectors on stator and regulator rectifier
  • Check and repair any melted wiring
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments

Vehicle Fitments
Have a question?

Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.