Contact Us
Shop By Vehicle

Stator for Arctic Cat 150 Utility 2x4 EFI L/C 2009-2019 | OEM Repl.# 3304-967 / 3304-968

RMSTATOR
SKU: RMS010-104894
In Stock
RMSTATOR

Stator for Arctic Cat 150 Utility 2x4 EFI L/C 2009-2019 | OEM Repl.# 3304-967 / 3304-968

$152.89
This product fits your
Close
FITMENT WARNING:
This product does not fit your
Close
This product is ride specific
Close
Shop By Vehicle

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Read more
Stator for Arctic Cat 150 Utility 2x4 EFI L/C 2009-2019 | OEM Repl.# 3304-967 / 3304-968
Stator for Arctic Cat 150 Utility 2x4 EFI L/C 2009-2019 | OEM Repl.# 3304-967 / 3304-968
$152.89
image
image
image
image

Details

Brand new aftermarket stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connectors included
  • Rubber grommet included
  • All products shipped are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Specifications

Dimensions :
Interior diameter : 32 mm
Exterior diameter : 88.5 mm
Thickness : 17 mm
Length of wires stator to grommet : 110 mm
Length of wires grommet to plug : 740 mm
Length of pickup coil's wire to grommet : 80 mm

Other specifications :
Number of wires : 6
Number of plugs : 3
Number of pins : 6
Number of poles : 10

Wire to wire resistance :
Alternator : Between each Yellow = 0.4 ohms +-20%
Pickup : Blue to Green = 100 ohms +-20%
Source : Black/Red to Ground = 450 ohms +-20%

Interchange Part Nº

  • 3304-968
  • 3304-967

Installation

Before installing your new stator

  • Check the AC output of the stator
  • Replace any burned or corroded connectors on stator and regulator rectifier
  • Check and repair any melted wiring
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments

Vehicle Fitments
Have a question?

Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.