Contact Us
Shop By Vehicle

Stator for Ducati Superbike 749 & 999 R S 2003-07 | Superbike 1098 R S / 1198 S 2003-11 | Street fighter 1099 2009-2012

RMSTATOR
SKU: RMS010-104750
In Stock
RMSTATOR

Stator for Ducati Superbike 749 & 999 R S 2003-07 | Superbike 1098 R S / 1198 S 2003-11 | Street fighter 1099 2009-2012

$149.89
This product fits your
Close
FITMENT WARNING:
This product does not fit your
Close
This product is ride specific
Close
Shop By Vehicle

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Read more
Stator for Ducati Superbike 749 & 999 R S 2003-07 | Superbike 1098 R S / 1198 S 2003-11 | Street fighter 1099 2009-2012
Stator for Ducati Superbike 749 & 999 R S 2003-07 | Superbike 1098 R S / 1198 S 2003-11 | Street fighter 1099 2009-2012
$149.89
image
image
image
image

Details

Brand new aftermarket Stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Connectors included
  • Rubber grommet included
  • All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Specifications

Dimensions :
Interior diameter : 54 mm
Exterior diameter : 115 mm
Thickness : 19 mm
Length of wires stator to grommet : 140 mm
Length of wires grommet to plug : 190 mm

Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3
Number of poles : 18

Wire to wire resistance :
Alternator : Between each Yellow = 0.4 ohms +-20%

Interchange Part Nº

  • 26440171A
  • 26420172A

Installation

Before installing your new stator

  • Check the AC output of the stator
  • Replace any burned or corroded connectors on stator and regulator rectifier
  • Check and repair any melted wiring
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments

Vehicle Fitments
Have a question?

Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.