Generator Stator for Polaris UTV RZR 170 2015 2016 2017 2018 2019 2020 2021 | OEM Repl.# 0455068

Generator Stator for Polaris UTV RZR 170 2015 2016 2017 2018 2019 2020 2021 | OEM Repl.# 0455068

Name: Generator Stator for Polaris UTV RZR 170 2015 2016 2017 2018 2019 2020 2021 | OEM Repl.# 0455068
Brand: RMSTATOR
SKU: RMS010-104230
Price: 163.89 USD
Availability: InStock

RMSTATOR

SKU: RMS010-104230

In Stock

RMSTATOR

Generator Stator for Polaris UTV RZR 170 2015 2016 2017 2018 2019 2020 2021 | OEM Repl.# 0455068

$163.89

This product fits your

Close

FITMENT WARNING:

This product does not fit your

Close

This product is ride specific

Close

Shop By Vehicle

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Brand new aftermarket stator

Direct replacement to your original unit
Plug-and-play unit, direct fit, and very easy to install.
Highest grade of lamination materials
Highest grade of copper winding, resistant to 200 degrees Celsius
Pick up pulsar coil included
Connector included
All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Specifications

Dimensions :
Interior diameter : 30 mm
Exterior diameter : 88.4 mm
Thickness : 14.75 mm
Length of wires stator to grommet : 140 mm
Length of wires grommet to plug : 260 mm
Length of pickup coil's wire to grommet : 100 mm

Other specifications :
Number of wires : 5
Number of plugs : 1
Number of pins : 5

Wire to wire resistance :
Alternator : Between each Yellow = 0.4 ohms +-20%
Pickup : Green to Blue = 100 ohms +-20%

Interchange Part Nº

0455068

Installation

Before installing your new stator

Check the AC output of the stator
Replace any burned or corroded connectors on stator and regulator rectifier
Check and repair any melted wiring
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments

Vehicle Fitments