- Store vehicles in your garage
- Get product recommendations
- Easily find products and accessories
Voltage Regulator for Arctic Cat Pro Climb / Cross 1100 / LXR Z1 XT Bearcat 3000 5000 / ZR 9000 2010-2019 |# 0630-288
Voltage Regulator for Arctic Cat Pro Climb / Cross 1100 / LXR Z1 XT Bearcat 3000 5000 / ZR 9000 2010-2019 |# 0630-288
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.





Details
Details
Brand new aftermarket voltage regulator rectifier
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- No assembly required
- Higher grade of electric components
- The quality exceeds the OEM equipment
- All products shipped are tested
All item pictures are accurate, if in doubt, do not hesitate and compare our item to your original part.
Specifications
Specifications
Dimensions :
Width: 66 mm
Length: 66 mm
Height: 27 mm
Wires length: 155 mm & 75 mm
Fixation holes center to center: 90 mm
Other specifications:
Number of plugs: 2
Number of pins: 5
Number of wires: 5
Minimum Charging Voltage: 14.5 V +- 0.5 V
Maximum Charging Current: 50 A / 500 W
Open Circuit Voltage: < 15 V
Operation Temperature: -20° to 85°
Interchange Part Nº
Interchange Part Nº
- 0630-255
- 0630-288
Installation
Installation
Before installing your new Voltage Regulator Rectifier:
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Vehicle Fitments
Vehicle Fitments
Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.