Contact Us
Shop By Vehicle

Kit Magneto Flywheel + Stator for Ski-Doo Tundra 280 R F/C Tundra 250 II 1998-2005

RMSTATOR
SKU: RM22869
In Stock
RMSTATOR

Kit Magneto Flywheel + Stator for Ski-Doo Tundra 280 R F/C Tundra 250 II 1998-2005

$525.78
This product fits your
Close
FITMENT WARNING:
This product does not fit your
Close
This product is ride specific
Close
Shop By Vehicle
Kit Magneto Flywheel + Stator for Ski-Doo Tundra 280 R F/C Tundra 250 II 1998-2005
Kit Magneto Flywheel + Stator for Ski-Doo Tundra 280 R F/C Tundra 250 II 1998-2005
$525.78
image
image
image
image

Details

Brand New Magneto Flywheel + Stator Kit

  • All products are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.


Brand new aftermarket stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Connector included

Specifications

Stator

Dimensions :
Interior diameter : 43 mm
Exterior diameter : 110 mm
Thickness : 32 mm
Length of wires stator to grommet : 500mm

Other specifications :
Number of wires : 6
Number of plugs : 2
Number of pins : 6

Wire to wire resistance :
Alternator : Yellow to Yellow = 0.4 ohms +/-20%
Alternator : Yellow to Ground = 0.L Source : Red to Black = 80 ohms +/-20%

Flywheel

Dimensions:
Exterior Diameter: 117 mm
Interior Diameter: 96 mm
Interior Diameter Center Housing: 24 mm
Exterior Diameter Center Housing: 35 mm
Thickness (exterior): 46 mm
Thickness (interior): 23 mm

Interchange Part Nº

  • Stator :

    420887657
  • 420886608
  • Flywheel :

    420996829

Installation

Before installing your new stator

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Before attempting to start your Ski Doo Tundra 300 R, adjusting the air gap is necessary. Rotate the flywheel so the raised node is lined up with the pick up/pulser coil and adjust as close as possible but no less than 0.010’’.

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments

Vehicle Fitments
Have a question?

Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.