- Store vehicles in your garage
- Get product recommendations
- Easily find products and accessories
Kit Stator + CDI + Ignition Coil + Gasket for Yamaha YFM 350 Raptor Warrior 2002-2013
Kit Stator + CDI + Ignition Coil + Gasket for Yamaha YFM 350 Raptor Warrior 2002-2013

Details
Details
Brand New Kit Stator + PeakRPM CDI Box + External Ignition Coil + Crankcase Cover Gasket
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- All shipped products are tested
*All item pictures are accurate, if in doubt, do not hesitate and compare our item to your original part.
Stator
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- Crankcase cover gasket included
PeakRPM CDI Box
- Our PeakRPM CDI Box provides the optimal output for your ride
- Higher grade of electronic components
- The Quality exceeds the OEM equipment
- Highest grade of lamination materials
- The Quality exceeds the OEM equipment
- Spark plug cap(s) included
If your old parts are defective, RM Stator offer replacements parts of high qualities at a fraction of the cost of genuine parts.
Specifications
Specifications
Interior diameter: 53 mm
Exterior diameter: 114 mm
Thickness: 13 mm
Other specifications:
Number of wires: 7
Number of plugs: 2
Number of pins: 7
Wire to wire resistance:
Alternator : White between each White = 0.4 ohms+/-20%
Pickup: Green to Blue = 518 ohms =+/-20%
Position sensor: Red to White/Blue = 0.1 ohms+/-20%
Height: 26 mm
Length: 109 mm
Width: 78 mm
Wires length: 120 mm
Other specifications:
Number of plugs: 2
Number of pins: 12
The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box
External ignition coil
Distance between fixation holes: 55 mm
Interchange Part Nº
Interchange Part Nº
-
Stator :
5NF-81410-00-00 -
CDI Box :
5YT-85540-00-00 - 5NF-85540-00-00
-
Gasket :
3GD-15451-00-00 -
External Ignition Coil :
3GD-82310-10-00 - 5KM-82310-03-00
- 3KJ-82310-13-00
- 5KM-82310-02-00
- 1UY-82370-20-00
- 5KM-82310-00-00
- 3KJ-82310-10-00
Installation
Installation
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
CDI Box
Our CDI may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This CDI is designed as a direct plug-in replacement and should be used as such.
External ignition coil
Remove the yellow wire from the external ignition coil, if it is not applicable to your model.
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Vehicle Fitments
Vehicle Fitments
Let customers speak for us
Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.
