Contact Us
Shop By Vehicle

Kit Stator 200 W + Regulator + Coil + Flywheel + Puller for Yamaha YFZ 350 Banshee 1995-2006 | # 3GG-85510-00-00

RMSTATOR
SKU: RM22808
Out of stock
RMSTATOR

Kit Stator 200 W + Regulator + Coil + Flywheel + Puller for Yamaha YFZ 350 Banshee 1995-2006 | # 3GG-85510-00-00

$373.96
Sold out
This product fits your
Close
FITMENT WARNING:
This product does not fit your
Close
This product is ride specific
Close
Shop By Vehicle
Kit Stator 200 W + Regulator + Coil + Flywheel + Puller for Yamaha YFZ 350 Banshee 1995-2006 | # 3GG-85510-00-00
Kit Stator 200 W + Regulator + Coil + Flywheel + Puller for Yamaha YFZ 350 Banshee 1995-2006 | # 3GG-85510-00-00
Sold out
image
image
image
image

Details

Brand New Kit Stator 200W + AC Regulator + External Ignition Coil + Flywheel + Flywheel Puller

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • All shipped products are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Brand New High Output Aftermarket Stator 200W :
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • Back Plate included

For a limited time we are including a FREE Tympanum AC regulator required to run the extra wattage supplied from our 200W stator :

  • 12 Volts regulator used by Baja winners
  • For use with all standard halogen and quartz lights
  • Precise voltage control, eliminates light burnout
  • Reduce flickering and dimming
  • Simple installation
  • Works with all other OEM parts
  • Rated at 225 watts
External Ignition Coil
  • Highest grade of lamination materials
  • Spark plug cap(s) included
Improved Stronger Magneto Flywheel Rotor
RMSTATOR is offering a new replacement flywheel with stronger magnetsfor your Banshee. This flywheel can be used as a direct replacement to the OEM.
We suggest combining it to our 100 or 200 watt stator as it will run the lights better in the lower rpm's.

Specifications

Dimensions Stator :
Interior diameter : 103mm
Exterior diameter : 34mm
Thickness : 27mm
Length of wires stator to grommet : 60mm
Length of wires grommet to plug : 520mm
Length of pickup coil's wire to grommet : 80mm

Other specifications :
Number of wires : 6
Number of plugs : 3
Number of pins : 6

Wire to wire resistance :
Alternator : Yellow to Black = 0.4ohms +/-20%
Pickup : White/Green to White/Red = 115ohms +/-20%
Source : Green to Red = 12ohms +/-20%

Dimensions AC Regulator:
Height: 20 mm
Length: 45 mm
Width: 45 mm

Other specifications:
Number of terminals: 2
Wires length: 130 mm

External Ignition coil
Distance between fixation holes: 90mm

Interchange Part Nº

  • Stator :

    3GG-85510-01-00
  • 3GG-85510-00-00
  • External Ignition Coil :

    2GU-82310-51-00
  • 2GU-82310-50-00
  • Puller :

    RM11300-R00
  • YM-01189
  • Flywheel :

    2GU-85550-50-00
  • 3GG-85550-01-00
  • 3GG-85550-00-00

Installation

Before installing your new stator/flywheel
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Check to be sure that all of the following is done to ensure that your AC regulator rectifier is installed properly:

  • Bolt regulator to frame
  • Ground Black wire to Frame or Harness ground
  • Connect yellow wire to AC output lead of the Stator

External Ignition Coil:
Remove the yellow wire from the external ignition coil, if it is not applicable to your model.

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments

Vehicle Fitments
Have a question?

Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.