- Store vehicles in your garage
- Get product recommendations
- Easily find products and accessories
Stator for Kawasaki KFX 50 2007-2024 | # 21003-Y003 21003-Y001 KFX50
RMSTATOR
SKU: RM01317
In Stock
RMSTATOR
Stator for Kawasaki KFX 50 2007-2024 | # 21003-Y003 21003-Y001 KFX50
Close
FITMENT WARNING:
Close
Close
Shop By Vehicle
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Read more
Stator for Kawasaki KFX 50 2007-2024 | # 21003-Y003 21003-Y001 KFX50
Details
Details
Brand new stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Specifications
Specifications
Dimensions:
Interior diameter: 28mm
Exterior diameter: 88mm
Thickness: 8mm
Length of wires stator to grommet: 75mm
Length of wires grommet to plug: 400mm
Length of pickup coil's wire to grommet: 5mm
Other specifications:
Number of wires: 3
Number of plugs: 2
Number of pins: 3
Wire to wire resistance:
Alternator: = 0.4 ohms +/-20%
Pickup: = 120 ohms =+/-20%
Interchange Part Nº
Interchange Part Nº
- 21003-Y003
- 21003-Y001
Installation
Installation
Before installing your new stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Vehicle Fitments
Vehicle Fitments
Vehicle Fitments
Recently Viewed
You may also like
Have a question?
Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.
