- Store vehicles in your garage
- Get product recommendations
- Easily find products and accessories
Stator for Honda TRX 250 Fourtrax Recon TM TE 1997-2004 & TRX 250 EX Sportrax 2001-2005
RMSTATOR
SKU: RM01309
In Stock
RMSTATOR
Stator for Honda TRX 250 Fourtrax Recon TM TE 1997-2004 & TRX 250 EX Sportrax 2001-2005
Close
FITMENT WARNING:
Close
Close
Shop By Vehicle
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Read more
Stator for Honda TRX 250 Fourtrax Recon TM TE 1997-2004 & TRX 250 EX Sportrax 2001-2005
Details
Details
Brand new aftermarket stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Pickup pulsar coil included
- Connector included
- Rubber grommet included
- All products shipped are tested
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.
Specifications
Specifications
Dimensions :
Interior diameter : 34 mm
Exterior diameter : 88 mm
Thickness : 18 mm
Length of wires stator to grommet : 95 mm
Length of wires grommet to plug : 250 mm
Length of pickup coil's wire to grommet : 110 mm
Other specifications :
Number of wires : 5
Number of plugs : 3
Number of pins : 5
Wire to wire resistance :
Alternator : Between each Yellow = 0.4 ohms +/-20%
Pickup : Blue/Yellow to Green = 280 ohms +/-20%
Source : Black/Red to Green = 190 ohms +/-20%
Interchange Part Nº
Interchange Part Nº
- 31120-HM8-004
Installation
Installation
Before installing your new Stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator might have a different wire color code than your original part.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010".
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Vehicle Fitments
Vehicle Fitments
Vehicle Fitments
Recently Viewed
You may also like
Have a question?
Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.
