- Store vehicles in your garage
- Get product recommendations
- Easily find products and accessories
Stator for Polaris Sportsman MV7 700 |Sportsman 600 / 700 2002-2005 | 2202602 / 2202603 / 4010709 / 4011103 / 4060150
Stator for Polaris Sportsman MV7 700 |Sportsman 600 / 700 2002-2005 | 2202602 / 2202603 / 4010709 / 4011103 / 4060150
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.





Details
Details
Brand new aftermarket stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- All products shipped are tested
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.
Specifications
Specifications
Dimensions :
Interior diameter : 40 mm
Exterior diameter : 108 mm
Thickness : 25 mm
Length of wires stator to grommet : 85 mm
Length of wires grommet to plug : 930 mm & 960 mm & 1400 mm
Length of pickup coil's wire to grommet : 160 mm
Other specifications :
Number of wires : 10
Number of plugs : 7
Number of pins : 10
Wire to wire resistance :
Alternator : Yellow to Yellow/Red = 0.4 ohms +/-20%
Alternator : Yellow to Ground = 0.L on display
Pickup : Red to Black = 360 ohms +/-20%
Source : Brown to Yellow = 5.8 ohms +/-20%
Interchange Part Nº
Interchange Part Nº
- 4060150
- 4011103
- 4010709
- 2202603
- 2202602
Installation
Installation
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Vehicle Fitments
Vehicle Fitments
Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.