Contact Us
Shop By Vehicle

Stator for Arctic Cat 90 | Alterra 90 | DVX 90 | 90 Utility 2006-2024 | # 3303-416 3304-641 3305-256 3305-254

RMSTATOR
SKU: RM01287
In Stock
RMSTATOR

Stator for Arctic Cat 90 | Alterra 90 | DVX 90 | 90 Utility 2006-2024 | # 3303-416 3304-641 3305-256 3305-254

$75.89
This product fits your
Close
FITMENT WARNING:
This product does not fit your
Close
This product is ride specific
Close
Shop By Vehicle

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Read more
Stator for Arctic Cat 90 | Alterra 90 | DVX 90 | 90 Utility 2006-2024 | # 3303-416 3304-641 3305-256 3305-254
Stator for Arctic Cat 90 | Alterra 90 | DVX 90 | 90 Utility 2006-2024 | # 3303-416 3304-641 3305-256 3305-254
$75.89
image
image
image
image

Details

Brand new stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • All products shipped are tested

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Specifications

Dimensions:
Interior diameter: 28mm
Exterior diameter: 87mm
Thickness: 8mm
Length of wires stator to grommet: 112mm
Length of wires grommet to plug: 325mm
Length of pickup coil's wire to grommet: 25mm

Other Specifications:
Number of wires: 3
Number of plugs: 1
Number of terminals: 3

Wire to wire resistance:
Alternator: Yellow to White = 0.4ohms +/-20%
Pickup: Blue/Yellow to Ground = 110ohms =+/-20%

Interchange Part Nº

  • 3303-416
  • 3305-254
  • 3304-641
  • 3305-256

Installation

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments

Vehicle Fitments
Have a question?

Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.