- Store vehicles in your garage
- Get product recommendations
- Easily find products and accessories
Generator Stator 420W for Can-Am Outlander 400 / 500 / Max | Renegade 500 / 800 / 1000 2003-2023 | 420296907 / 420685920
Generator Stator 420W for Can-Am Outlander 400 / 500 / Max | Renegade 500 / 800 / 1000 2003-2023 | 420296907 / 420685920
Please Note: For some Can-Am models, there are several stator configurations available with varying outputs. Please be sure of which OEM and output your machine needs before purchasing. This part will replace OEMs 420296907, 420684850, 420685920 and 420684040 and has an output of 420 watts.
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.





Details
Details
Brand new aftermarket 420W stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Connector included
- Rubber grommet included
- All product shipped are tested
Please note: There are two different stators that fits a CAN-AM Outlander 800 cc 2015 and Renegade 1000 cc 2015. See specification tab for details. PLEASE VALIDATE THESE MEASUREMENTS WITH YOUR OLD STATOR BEFORE BUYING THIS PRODUCT
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.
Specifications
Specifications
Please note: There are two different stators that fits a CAN-AM Outlander 800 cc 2015 and Renegade 1000 cc 2015. See specification tab for details. PLEASE VALIDATE THESE MEASUREMENTS WITH YOUR OLD STATOR BEFORE BUYING THIS PRODUCT
Dimensions:
Interior diameter: 41 mm
Exterior diameter: 104 mm
Thickness: 30 mm
Length of wires stator to grommet : 140 mm
Length of wires grommet to plug : 850 mm
Other specifications:
Number of wires: 3
Number of plugs: 1
Number of terminals: 3
Wire to wire resistance:
Alternator: Yellow between each Yellow = 0.4 ohms +/-20%
Interchange Part Nº
Interchange Part Nº
- 420684040
- 420685920
- 420684850
- 420296907
Installation
Installation
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Vehicle Fitments
Vehicle Fitments
Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.