Stator for Arctic Cat Z1 TZ1 XF Bearcat 1100 F 1100 M 1100 2007-2017

Stator for Arctic Cat Z1 TZ1 XF Bearcat 1100 F 1100 M 1100 2007-2017

Name: Stator for Arctic Cat Z1 TZ1 XF Bearcat 1100 F 1100 M 1100 2007-2017
Brand: RMSTATOR
SKU: RM01236
Price: 229.89 USD
Availability: InStock

RMSTATOR

SKU: RM01236

In Stock

RMSTATOR

Stator for Arctic Cat Z1 TZ1 XF Bearcat 1100 F 1100 M 1100 2007-2017

$229.89

This product fits your

Close

FITMENT WARNING:

This product does not fit your

Close

This product is ride specific

Close

Shop By Vehicle

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Brand new stator

Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials
Highest grade copper windings, resistant to 200 degrees Celsius.
Connector included
Rubber grommet included
Pick-up coil included
All product shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Specifications

Alternator resistance (Yellow to Yellow) : 0.4 ohms +/- 20%
Pick-up 1 resistance (Blue to Green) : 215 ohms +/- 20%
Number of wires : 5
Number of plugs : 2
Number of terminals : 5
Harness length - Stator to grommet (mm) : 80
Harness length - Grommet to plug (mm) : 400
Pick-up coil wire length - Coil to grommet (mm) : 35
Inside diameter (mm) : 40
Outside diameter (mm) : 113
Thickness (mm) : 20

Interchange Part Nº

3007-231

Installation

Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments

Vehicle Fitments