- Store vehicles in your garage
- Get product recommendations
- Easily find products and accessories
Stator for Honda TRX 300 Fourtrax EX TRX 300 Sportrax EX TRX 300 X 1993-2009
RMSTATOR
SKU: RM01150
In Stock
RMSTATOR
Stator for Honda TRX 300 Fourtrax EX TRX 300 Sportrax EX TRX 300 X 1993-2009
Close
FITMENT WARNING:
Close
Close
Shop By Vehicle
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Read more
Stator for Honda TRX 300 Fourtrax EX TRX 300 Sportrax EX TRX 300 X 1993-2009
Details
Details
Brand new stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Connector included
- Rubber grommet included
- All product shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Specifications
Specifications
Dimensions :
Interior diameter : 35mm
Exterior diameter : 93mm
Thickness : 15mm
Length of wires stator to grommet : 95mm
Length of wires grommet to plug : 75mm, 275mm, 540mm
Interior diameter : 35mm
Exterior diameter : 93mm
Thickness : 15mm
Length of wires stator to grommet : 95mm
Length of wires grommet to plug : 75mm, 275mm, 540mm
Other specifications :
Number of wires : 6
Number of plugs : 3
Number of pins : 7
Wire to wire resistance :
Alternator : Yellow Between Each Yellow = 0.4ohms +/-20%
Interchange Part Nº
Interchange Part Nº
- 31120-HM3-671
Installation
Installation
Before installing your new stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Vehicle Fitments
Vehicle Fitments
Vehicle Fitments
Recently Viewed
You may also like
Have a question?
Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.
