High Output Stator for Honda XL XR R 350 500 600 1983-1987

High Output Stator for Honda 350 / 500 / 600 XL XR R 1983-1987 | 31120-MG2-015 / 31120-MG2-005 / 31120-MG3-015

Name: High Output Stator for Honda 350 / 500 / 600 XL XR R 1983-1987 | 31120-MG2-015 / 31120-MG2-005 / 31120-MG3-015
Brand: RMSTATOR
SKU: RM01050S
Price: 174.89 USD
Availability: InStock

RMSTATOR

SKU: RM01050S

In Stock

RMSTATOR

High Output Stator for Honda 350 / 500 / 600 XL XR R 1983-1987 | 31120-MG2-015 / 31120-MG2-005 / 31120-MG3-015

$174.89

This product fits your

Close

FITMENT WARNING:

This product does not fit your

Close

This product is ride specific

Close

Shop By Vehicle

This stator looks very different from many of the compatible OEM Honda XR/XL 350/500/600 stators. However, it will work perfectly to replace and upgrade these parts.

To duplicate OEM functionality connect the Red/Black wire (ignition source coil), and the White wire (lighting coil) to their respective wires on the bike's harness, and ground the Green wire to the frame. The Yellow and Red wires can be insulated and tied up, unused.

Between the Yellow and Red wires is another 100 Watt coil that is floated, or NOT grounded to the stator core. This coil can be used with a regulator/rectifier to charge a battery, or to drive additional lights, heated grips, or other electrical accessories. If you are running an additional light directly from this coil (AC current), make sure to use an additional AC regulator to protect this lighting circuit.

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Brand new High Output Stator

Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade of lamination materials
Highest grade of copper winding, resistant to 200 degrees Celsius.
Connector included
Rubber grommet included
All products shipped are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Specifications

Dimensions:
Interior diameter: 54 mm
Exterior diameter: 115 mm
Thickness: 15 mm
Length of wires stator to grommet: 130 mm

Other specifications:
Number of wires: 5
Number of plugs: 5
Number of pins: 5

Wire to wire resistance:
Alternator: White to Green = 0.4 ohms +/-20%
Alternator: Yellow to Red = 0.4 ohms +/-20%
Source: Green to Red/Black = 140 ohms +/-20%

Interchange Part Nº

31120-MG3-015
31120-MG3-005
31120-MG3-000
31120-MG2-015
31120-MG2-005
31120-KN5-416
31120-KN5-406
31120-KN5-004
31120-KF0-771
31120-KF0-004

Installation

Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments

Vehicle Fitments