Menu

Canada Client canadien ?  Allez au site canadien

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Service à la clientèle 1-877-838-1399 - 8h-17h HNE Lun-Jeu & 8h-16h HNE Ven

Panier

0 item (0,00 US$)

X

Vous recherchez présentement avec des filtres

Generator Stator For Yamaha Dirt Bike PW50 Y-Zinger 1990-2000

RM01583
RMSTATOR

Generator Stator For Yamaha Dirt Bike PW50 Y-Zinger 1990-2000

RM01583
RMSTATOR
Exact fit

Disponibilité : Rupture de stock

Prix : 59,00 US$

"

Brand new aftermarket stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Connector included
  • Rubber grommet included
  • Back Plate included
  • All products shipped are tested
  • One year limited warranty

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

"

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Détails

"

Brand new aftermarket stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Connector included
  • Rubber grommet included
  • Back Plate included
  • All products shipped are tested
  • One year limited warranty

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

"

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Videos

Spécifications

"

Dimensions :
Length of wires stator to grommet : 22 mm
Length of wires grommet to plug : 170 mm

Other specifications :
Number of wires : 4
Number of plugs : 2
Number of pins : 4

Wire to wire resistance :
Alternator : Black to White = 0.9 ohms +-20%
Pickup : Black to Black/Red = 307 ohms +-20%
Source : Black to White/Red = 20 ohms +-20%

"

# Remplacement OEM

4X4-85560-M1-00

Instructions d'installation

Before installing your new stator

  • Check the AC output of the stator
  • Replace any burned or corroded connectors on stator and regulatorrectifier
  • Check and repair any melted wiring
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Commentaires

Q&A