Menu

Canada Client canadien ?  Allez au site canadien

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Service à la clientèle 1-877-838-1399 - 8h-17h HNE Lun-Jeu & 8h-16h HNE Ven

Panier

0 item (0,00 US$)

X

Vous recherchez présentement avec des filtres

Stator Yamaha 1983-2007 ( Venture Royal 1200 1300 Venture 1200 1300 V-Max 1200 )

RM01051
RMSTATOR

Stator Yamaha 1983-2007 ( Venture Royal 1200 1300 Venture 1200 1300 V-Max 1200 )

RM01051
RMSTATOR

Disponibilité : En stock

Prix : 99,00 US$

OU

Brand new stator

  • You must re-install your original grommet and the new connector (see picture).
  • Once your connector and grommet is re-installed, our part becomes a Plug-and-play unit, direct fit, and very easy to install.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Connector included
  • All product shipped are tested
  • One year limited warranty

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Détails

Brand new stator

  • You must re-install your original grommet and the new connector (see picture).
  • Once your connector and grommet is re-installed, our part becomes a Plug-and-play unit, direct fit, and very easy to install.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Connector included
  • All product shipped are tested
  • One year limited warranty

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Videos

# Remplacement OEM

1FK-81410-11-00
26H-81410-12-00
3JJ-81410-00-00
3UF-81410-00-00
90-89130-01-50
3UF-81410-10-00
26H-81410-10-00

Compatibilité

Instructions d'installation

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Commentaires

Q&A