Menu

Worldwide Client international ?  Allez au site international

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Service à la clientèle 1-877-838-1399 - 8h-17h HNE Lun-Jeu & 8h-16h HNE Ven

Panier

0 item (0,00 $CA)

X

Vous recherchez présentement avec des filtres

Used - Stator

RM01339U
RMSTATOR

Used - Stator

RM01339U
RMSTATOR

Disponibilité : Rupture de stock

Prix : 105,00 $CA

  • You must re-install your original connector (see picture).
  • Once your connector is re-installed, our part becomes a Plug-and-play unit, direct fit, and very easy to install.
  • Pick up pulsar coil included
  • Grommet included
  • Higher grade of electronic components.
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • All products shipped are tested
  • One year limited warranty
 

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Détails

  • You must re-install your original connector (see picture).
  • Once your connector is re-installed, our part becomes a Plug-and-play unit, direct fit, and very easy to install.
  • Pick up pulsar coil included
  • Grommet included
  • Higher grade of electronic components.
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • All products shipped are tested
  • One year limited warranty
 

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Videos

Spécifications

Five wires

Five terminals

ALTERNATOR White Between each White 0.6 ohms ±20%

ALTERNATOR White to Ground O.L ON DISPLAY

PICK UP COIL Black to White 185 ohms ±20%


# Remplacement OEM


Before installing your new stator

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

 

The three alternator wires (same color) have no specific order. All of the wires are installed in the correct order; please do not change any of the wiring configurations.

This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.

If our stator includes a pickup coil, always make sure the air gap is correct. We suggest as close as possible no less than 0.010’’.



8es-81410-00-00
8gc-81410-00-00
8gc-81410-10-00

Instructions d'installation

Before installing your  stator

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

 

The three alternator wires (same color) have no specific order. All of the wires are installed in the correct order; please do not change any of the wiring configurations.

This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.

If our stator includes a pickup coil, always make sure the air gap is correct. We suggest as close as possible no less than 0.010’’.


Commentaires

Q&A