0 item (US$0.00)
Brand new aftermarket voltage regulator rectifier
- Direct replacement to your original unit.
- Plug-and-play, direct fit, easy installation.
- No assembly required
- Higher grade of electric components.
- Improved heat sink and charging capabilities
- The quality exceeds the OEM equipment
- All products shipped are tested
All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Details
Brand new aftermarket voltage regulator rectifier
- Direct replacement to your original unit.
- Plug-and-play, direct fit, easy installation.
- No assembly required
- Higher grade of electric components.
- Improved heat sink and charging capabilities
- The quality exceeds the OEM equipment
- All products shipped are tested
All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Specifications
Dimensions :
Width : 45mm
Length : 55mm
Height: 22mm
Fixation holes center to center : 60mm
Wires length: 93mm
Other specifications :
Number of plugs : 4
Number of pins : 4
Minimum Charging Voltage: 14.5V +/- 0.5V
Maximum Charging Current: 25A-35A/300W-500W
Open Circuit Voltage: <15V
Operation Temperature: -20⁰ to 85⁰
OEM # Replacement
Fits models
- PWC
- 1999
- Sea-doo
- 800 SPX
- Sea-doo
- 1998
- Sea-doo
- 800 SPX
- Sea-doo
- 1997
- Sea-doo
- 800 GTX
- 800 SP
- 800 SPX
- Challenger 782 cc 110 hp
- Sea-doo
- 1996
- Sea-doo
- 800 GSX
- 800 GTX
- 800 XP
- Challenger 782 cc 110 hp
- Sea-doo
- 1995
- Sea-doo
- 800 XP
- Sea-doo
- 1999
Installation instructions
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.