0 item (US$0.00)
Brand new voltage regulator rectifier
- You must re-install your original connector.
- Once your connector is re-installed, our part becomes a Plug-and-play unit, direct fit, and easy to install.
- The Quality exceeds the OEM equipment
- Improved heat sink and charging capabilities
- Higher grade of electric components.
- All products shipped are tested
- One year limited warranty
*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Details
Brand new voltage regulator rectifier
- You must re-install your original connector.
- Once your connector is re-installed, our part becomes a Plug-and-play unit, direct fit, and easy to install.
- The Quality exceeds the OEM equipment
- Improved heat sink and charging capabilities
- Higher grade of electric components.
- All products shipped are tested
- One year limited warranty
*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Specifications
Dimensions :
Width : 80mm
Length : 104mm
Height: 30mm
Fixation holes center to center : 75mm
Wires length: 300mm
Other specifications :
Number of plugs : 0
Number of wires : 7
Number of pins : 7
Minimum Charging Voltage: 14.5V +/- 0.5V
Maximum Charging Current: 25A-35A/300W-500W
Open Circuit Voltage: <15V
Operation Temperature: -20⁰ to 85⁰
OEM # Replacement
31600-MF2-000
31600-MF5-000
Installation instructions
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.