Stator for Yamaha Venture 1200 1983-1985 / Royale 1983-1985 1989 | Venture 1300 1986-1988 / Royale 1986-1989
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !
- 1989 Yamaha Venture Royale 1300
- 1989 Yamaha Venture Royale 1200
- 1988 Yamaha Venture Royale 1300
- 1988 Yamaha Venture 1300
- 1987 Yamaha Venture Royale 1300
- 1987 Yamaha Venture 1300
- 1986 Yamaha Venture Royale 1300
- 1986 Yamaha Venture 1300
- 1985 Yamaha Venture Royale 1200
- 1985 Yamaha Venture 1200
- 1984 Yamaha Venture Royale 1200
- 1984 Yamaha Venture 1200
- 1983 Yamaha Venture Royale 1200
- 1983 Yamaha Venture 1200
26H-81410-10-00
90891-30015-00
Dimensions :
Interior diameter : 55 mm
Exterior diameter : 115 mm
Thickness : 40 mm
Length of wires stator to grommet : 110 mm
Length of wires grommet to plug : 770 mm
Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3
Number of poles : 18
Wire to wire resistance :
Alternator : Between each yellow = 0.4 ohms +-20%
Before installing your new stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new aftermarket Stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius.
- Connectors included
- Rubber grommet included
- All products shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.