Stator for Yamaha YFM 80 Badger 1992-1994 / YFM 100 Champ 1989-1991 | OEM Repl.# 3GB-85560-10-00 / 3GB-85560-00-00
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !
3GB-85560-10-00
Dimensions :
Interior diameter : 19 mm
Exterior diameter : 110 mm
Thickness : 33 mm
Length of wires stator to grommet : 50 mm
Length of wires grommet to plug : 160 mm
Length of pickup coil's wire to grommet : 40 mm
Other specifications :
Number of wires : 8
Number of plugs : 5
Number of pins : 10
Wire to wire resistance :
Alternator : Yellow/Red to White = 0.7 ohms +-20%
Pickup : White/Blue to White/Red = 339 ohms +-20%
Source : Green/White to Black/Red = 401 ohms +-20%
Before installing your new Stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator might have a different wire color code than your original part.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010".
Brand new aftermarket stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- Back Plate included
- All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.