Generator Stator for Suzuki Boulevard M109R VZR1800 VZR 1800 2006-2017 2019
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2019 Suzuki Boulevard M109R VZR1800
- 2017 Suzuki Boulevard M109R VZR1800
- 2016 Suzuki Boulevard M109R VZR1800
- 2015 Suzuki Boulevard M109R VZR1800
- 2014 Suzuki Boulevard M109R VZR1800
- 2013 Suzuki Boulevard M109R VZR1800
- 2012 Suzuki Boulevard M109R VZR1800
- 2011 Suzuki Boulevard M109R VZR1800
- 2009 Suzuki Boulevard M109R VZR1800
- 2008 Suzuki Boulevard M109R VZR1800
- 2007 Suzuki Boulevard M109R VZR1800
- 2006 Suzuki Boulevard M109R VZR1800
Dimensions :
Interior diameter : 54 mm
Exterior diameter : 140 mm
Thickness : 18 mm
Length of wires stator to grommet : 150 mm
Length of wires grommet to plug : 420 mm
Length of pickup coil's wire to grommet : 240 mm
Other specifications :
Number of wires :5
Number of plugs : 2
Number of pins :5
Wire to wire resistance :
Alternator : Black to Black = 0.5 ohms +-20%
Pickup : Blue to Green = 239 ohms +-20%
Before installing your new stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulatorrectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new aftermarket generator stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- All products shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted corroded defective and a major cause for repetitive electrical issues.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.