Stator Pickup Pulsar Coil for Ski-Doo / Lynx Formula GSX GTX Skandic Summit Xtrim 1999-2020 | OEM 420966835 410922925

$USD 39.00
Availability: In stock
SKU
RM00118
410922963
420966838
410922969
410922955
410922932
420966835
410922951
410922925
420893060
420866370
Dimensions:
Height: 28mm
Length: 24mm
Width: 19mm
Bracket center to center: 35mm
Wires length : 600mm

Other specifications:
Number of wires : 2
Number of pins: 2

Wire to wire resistance:
Blue to White = 250 ohms+/-20%
Not following these instructions may result in damaging the part or other components on your vehicle.
  • By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
  • Insulate your solders with heat shrink.
  • Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
  • Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010メメ.
  • If no spark or erratic spark, switch the wires at the plug.

Brand new pick up coil 250 ohms

  • We offer a brand new pickup/pulser coil for you to repair your stator.
  • Often unavailable from the OEM manufacturer
  • All products shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Stator Pickup Pulsar Coil for Ski-Doo / Lynx Formula GSX GTX Skandic Summit Xtrim 1999-2020 | OEM 420966835 410922925
Your Rating
Customers Also Viewed
Currently there is no product to display.