Stator Pickup Pulsar Coil for Can-am Traxter / Traxter XT / Traxter Max XT / Traxter XL 500 650 cc 1999-2005

$USD 34.00
Availability: In stock
SKU
RM00146
420296321
Dimensions:
Height: 27 mm
Length: 22 mm
Width: 21 mm
Bracket center to center: N/A
Wires length : 225 mm

Other specifications:
Number of wires : 2
Number of pins: N/A

Wire to wire resistance:
Blue to White = 245 ohms+/-20%

Not following these instructions may result in damaging the part or other components on your vehicle.

  • By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
  • Insulate your solders with heat shrink.
  • Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
  • Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
  • If no spark or erratic spark, switch the wires at the plug.

Brand new pick up coil 250 ohms

  • We offer a brand new pickup/pulsar coil for you to repair your stator.
  • Often unavailable from the OEM manufacturer
  • The fixing bracket is not included, you need to re-install your OEM fixing bracket
  • All products shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Stator Pickup Pulsar Coil for Can-am Traxter / Traxter XT / Traxter Max XT / Traxter XL 500 650 cc 1999-2005
Your Rating
Customers Also Viewed
Currently there is no product to display.