0 item (US$0.00)
Brand new stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Connector included
- Rubber grommet included
- Pick-up coil included
- All product shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Details
Brand new stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Connector included
- Rubber grommet included
- Pick-up coil included
- All product shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Videos
How Charging / Ignition / Starting Systems Work
How to repair your connectors like a pro!
RMSTATOR Corporate Video
Specifications
Pick-up 1 resistance (Blue/Yellow to Green) : 239 ohms +/- 20%
Number of wires : 5
Number of plugs : 1
Number of terminals : 5
Harness length - Stator to grommet (mm) : 130
Harness length - Grommet to plug (mm) : 270
Pick-up coil wire length - Coil to grommet (mm) : 70
Inside diameter (mm) : 41
Outside diameter (mm) : 107
Thickness (mm) : 21
OEM # Replacement
Fits models
- ATV
- 2013
- Honda
- TRX 500 Fourtrax Foreman FE
- TRX 500 Fourtrax Foreman FM
- TRX 500 Fourtrax Foreman FPE EPS
- TRX 500 Fourtrax Foreman FPM EPS
- Honda
- 2012
- Honda
- TRX 500 Fourtrax Foreman FE
- TRX 500 Fourtrax Foreman FM
- TRX 500 Fourtrax Foreman FPE EPS
- TRX 500 Fourtrax Foreman FPM EPS
- Honda
- 2013
Installation instructions
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".