Menu

Canada Canadian Customer?  Go to our Canadian Store

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (US$0.00)

X

You are currently searching with filters

Stator Honda TRX 300 Fourtrax EX TRX 300 Sportrax EX TRX 300 X 1993-2009

RM01150
RMSTATOR

Stator Honda TRX 300 Fourtrax EX TRX 300 Sportrax EX TRX 300 X 1993-2009

RM01150
RMSTATOR

Availability: In stock

Price: US$159.00

OR

Brand new stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Connector included
  • Rubber grommet included
  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Details

Brand new stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Connector included
  • Rubber grommet included
  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Videos

Specifications

Dimensions :
Interior diameter : 35mm
Exterior diameter : 93mm
Thickness : 15mm
Length of wires stator to grommet : 95mm
Length of wires grommet to plug : 75mm, 275mm, 540mm

Other specifications :
Number of wires : 6
Number of plugs : 3
Number of pins : 7

Wire to wire resistance :
Alternator : Yellow Between Each Yellow = 0.4ohms +/-20%

OEM # Replacement

31120-HM3-671

Fits models

Installation instructions

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Reviews

Q&A