Stator Pickup Pulsar Coil for Yamaha YFZ 450 / YFZ 450 X / YFZ 450 R 2004-2024 | WR 250 F 2005-2013

$USD 59.00
Availability: In stock
SKU
RM00109
5TG-81410-00-00
5TG-81410-01-00
5TG-81410-02-00
5TG-81410-03-00
5TG-81410-10-00
18P-81410-00-00
5UM-81410-10-00
5UM-81410-31-00
5UM-81410-20-00
5UM-81410-30-00
Dimensions:
Height: 18mm
Length: 23mm
Width: 19mm
Bracket center to center: 35mm

Other specifications:
Number of wires : 0
Number of pins: 2

Wire to wire resistance:
Pin to Pin = 300 ohms+/-20%
Not following these instructions may result in damaging the part or other components on your vehicle.
  • By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
  • Insulate your solders with heat shrink.
  • Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
  • Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010メメ.
  • If no spark or erratic spark, switch the wires at the plug.

Brand new pick up coil 300 ohms

  • We offer a brand new pickup/pulsar coil for you to repair your stator.
  • Often unavailable from the OEM manufacturer
  • All products shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Stator Pickup Pulsar Coil for Yamaha YFZ 450 / YFZ 450 X / YFZ 450 R 2004-2024 | WR 250 F 2005-2013
Your Rating
Customers Also Viewed
Currently there is no product to display.