Pickup Pulsar Coil for Ski-Doo Grand Touring Legend Summit Renegade RER 500 600 700 800 | Lynx 600 1999-2020 | 410922948

$USD 79.00
Availability: In stock
SKU
RM00130
410922940
410922909
410922948
420966804
420966802

Dimensions:
Height: 21mm
Length: 27mm
Width: 27mm

Bracket center to center: 35mm
Wires length: 400mm

Other specifications:
Number of wires : 4
Number of pins: 4
Number of plugs: 1

Wire to wire resistance:
Blue/Yellow to Yellow/White = 300ohms +/-20%
Green to Grey: 300 ohms +/-20%

Not following these instructions may result in damaging the part or other components on your vehicle.
  • By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
  • Insulate your solders with heat shrink.
  • Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
  • Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010メメ.
  • If no spark or erratic spark, switch the wires at the plug.

Brand new pick up coil 300 ohms

  • We offer a brand new pickup/pulser coil for you to repair your stator.
  • Often unavailable from the OEM manufacturer
  • All products shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Pickup Pulsar Coil for Ski-Doo Grand Touring Legend Summit Renegade RER 500 600 700 800 | Lynx 600 1999-2020 | 410922948
Your Rating
Customers Also Viewed
Currently there is no product to display.