0 item (US$0.00)
Brand new pick up coil for Stator 220 ohms
- We offer a brand new pickup/pulsar coil for you to repair your stator.
- Often unavailable from the OEM manufacturer
- All products shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Details
Brand new pick up coil for Stator 220 ohms
- We offer a brand new pickup/pulsar coil for you to repair your stator.
- Often unavailable from the OEM manufacturer
- All products shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Specifications
Height: 20 mm
Length: 23 mm
Width: 20 mm
Bracket center to center: 35 mm
Wires length : 290 mm
Other specifications:
Wire to wire resistance:
White/Red to White/Green = 220 ohms +/-20%
OEM # Replacement
Fits models
- Snowmobile
- 1996
- Yamaha
- V-Max 500
- V-Max 600
- V-Max 600 Mountain Max
- Yamaha
- 1995
- Yamaha
- V-Max 500
- V-Max 600
- Yamaha
- 1994
- Yamaha
- V-Max 500
- V-Max 600
- Yamaha
- 1996
Installation instructions
Not following these instructions may result in damaging the part or other components on your vehicle.
- By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
- Insulate your solders with heat shrink.
- Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
- Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
- If no spark or erratic spark, switch the wires at the plug.