0 item (US$0.00)
Brand new aftermarket voltage regulator rectifier
- Direct replacement to your original unit.
- Plug-and-play, direct fit, easy installation.
- No assembly required
- Higher grade of electric components.
- The quality exceeds the OEM equipment
- All products shipped are tested
All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Details
Brand new aftermarket voltage regulator rectifier
- Direct replacement to your original unit.
- Plug-and-play, direct fit, easy installation.
- No assembly required
- Higher grade of electric components.
- The quality exceeds the OEM equipment
- All products shipped are tested
All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Specifications
Dimensions :
Width : 94mm
Length : 80mm
Height: 28mm
Fixation holes center to center : 74mm
Other specifications :
Number of plugs : 2
Number of pins : 5
OEM # Replacement
31600-MJJ-D31
31600-MFG-D01
31600-MFL-003
Fits models
- Motorcycle
- 2018
- Honda
- CBR 1000 RA
- CBR 1000 RR
- CBR 1000 S
- Honda
- 2017
- Honda
- CBR 1000 RA
- CBR 1000 RR
- CBR 1000 S
- NC 700 DCT ABS EFI F/C
- Honda
- 2016
- Honda
- CB 1000 R
- CBF 1000
- CBR 1000 RR
- CBR 1000 S
- NC 700 DCT ABS EFI F/C
- Honda
- 2015
- Honda
- CB 1000 R
- CBF 1000
- CBR 1000 RR
- CBR 1000 S
- NC 700 DCT ABS EFI F/C
- NC 700 EFI F/C
- Honda
- 2014
- Honda
- CB 1000 R
- CBF 1000
- CBR 1000 RR
- CBR 1000 S
- NC 700 DCT ABS EFI F/C
- NC 700 EFI F/C
- Honda
- 2013
- Honda
- CB 1000 R
- CBF 1000
- CBR 1000 RR
- NC 700 DCT ABS EFI F/C
- Honda
- 2012
- Honda
- CB 1000
- CB 1000 R
- CBF 1000
- CBR 1000 RR
- NC 700 EFI F/C
- Honda
- 2011
- Honda
- CB 1000
- CB 1000 R
- CBF 1000
- CBR 1000 RR
- Honda
- 2010
- Honda
- CB 1000
- CB 600 F
- CBR 1000 RR
- Honda
- 2009
- Honda
- CB 1000
- CB 600 F
- CBR 1000 RR
- NSA 700 DN-01
- Honda
- 2008
- Honda
- CB 1000
- CB 600 F
- CBR 1000 RR
- NSA 700 DN-01
- Honda
- 2018
- Scooter
- 2016
- Honda
- NSS 300 Forza
- Honda
- 2015
- Honda
- NSS 300 Forza
- Honda
- 2014
- Honda
- NSS 300 Forza
- Honda
- 2016
Installation instructions
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.