Mosfet Regulator for Honda VTX 1300 C / VTX 1300 R / VTX 1300 S / VTX 1300 T 2003-2009
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2009 Honda VTX 1300 T
- 2009 Honda VTX 1300 R
- 2009 Honda VTX 1300 C
- 2008 Honda VTX 1300 T
- 2008 Honda VTX 1300 R
- 2008 Honda VTX 1300 C
- 2007 Honda VTX 1300 S
- 2007 Honda VTX 1300 R
- 2007 Honda VTX 1300 C
- 2006 Honda VTX 1300 S
- 2006 Honda VTX 1300 R
- 2006 Honda VTX 1300 C
- 2005 Honda VTX 1300 S
- 2005 Honda VTX 1300 R
- 2005 Honda VTX 1300 C
- 2004 Honda VTX 1300 S
- 2004 Honda VTX 1300 R
- 2004 Honda VTX 1300 C
- 2003 Honda VTX 1300 S
31600-MEA-670
Dimensions:
Width: 90 mm
Length: 90 mm
Height: 30 mm
Wires length: 600 mm
Fixation holes center to center: 75 mm
Other specifications:
Number of plugs: 2
Number of pins: 7
Number of wires: 7
Before installing your new Voltage Regulator Rectifier:
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator rectifier.
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.
Brand new aftermarket Mosfet Voltage Regulator Rectifier
- Direct replacement to your original unit.
- Plug-and-play, direct fit, easy installation.
- No assembly required
- Higher grade of electric components.
- Improved heat sink and charging capabilities
- The quality exceeds the OEM equipment
- All products shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted, corroded, defective and a major cause for repetitive electrical issues.
All item pictures are accurate, if in doubt, do not hesitate and compare our item to your original part.