Menu

Canada Canadian Customer?  Go to our Canadian Store

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (US$0.00)

X

You are currently searching with filters

Kit Stator + Voltage Regulator Rectifier For Honda CBR 900 RR 929 RR 2000-2001

RM22967
RMSTATOR

Kit Stator + Voltage Regulator Rectifier For Honda CBR 900 RR 929 RR 2000-2001

RM22967
RMSTATOR

Availability: In stock

Price: US$188.10

OR
YOU SAVE 5% off the items price combined, when buying a kit.

Brand new stator and voltage regulator rectifier kit

  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Stator
  • You must re-install your original connector and grommet (see picture).
  • Once your connector and grommet is re-installed, our part becomes a Plug-and-play unit, direct fit, and very easy to install.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

Voltage regulator rectifier
  • Direct replacement to your original unit.
  • Plug-and-play, direct fit, easy installation.
  • No assembly required
  • Connector included
  • The Quality exceeds the OEM equipment
  • Improved heat sink and charging capabilities
  • Higher grade of electric components.

Details

YOU SAVE 5% off the items price combined, when buying a kit.

Brand new stator and voltage regulator rectifier kit

  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Stator
  • You must re-install your original connector and grommet (see picture).
  • Once your connector and grommet is re-installed, our part becomes a Plug-and-play unit, direct fit, and very easy to install.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

Voltage regulator rectifier
  • Direct replacement to your original unit.
  • Plug-and-play, direct fit, easy installation.
  • No assembly required
  • Connector included
  • The Quality exceeds the OEM equipment
  • Improved heat sink and charging capabilities
  • Higher grade of electric components.

Videos

Specifications

Stator
Dimensions :
Interior diameter : 53mm
Exterior diameter : 114mm
Thickness : 16mm
Length of wires stator to terminals : 1220mm

Other specifications :
Number of wires : 3
Number of plugs : 0
Number of pins : 3

Wire to wire resistance :
Alternator : White between each White = 0.2 ohms +/-20%

Voltage regulator rectifier
Dimensions:
Width:103mm
Length: 80mm
Height: 33mm
Wires length: 300mm
Fixation holes center to center: 70mm

Other specifications:
Number of plugs: 2
Number of pins: 7
Number of wires: 7

OEM # Replacement

Stator :
31120-MCJ-003
Régulateur de voltage :
31600-MCJ-641

Fits models

Installation instructions

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Before installing your new regulator/rectifier:
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors.

Reviews

Q&A