Menu

Canada Canadian Customer?  Go to our Canadian Store

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (US$0.00)

X

You are currently searching with filters

Kit Stator + HP CDI Box + External Ignition Coil + Crankcase Cover Gasket For Yamaha YFM 350 Raptor / Warrior 2002-2013

RM22812
RMSTATOR

Kit Stator + HP CDI Box + External Ignition Coil + Crankcase Cover Gasket For Yamaha YFM 350 Raptor / Warrior 2002-2013

RM22812
RMSTATOR

Availability: In stock

Price: US$295.45

OR
YOU SAVE 5% off the items price combined, when buying a kit.

Brand New Kit Stator + HP CDI Box + External Ignition Coil + Crankcase Cover Gasket

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All product shipped are tested
  • One year limited warranty
*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

Stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • Crankcase cover gasket included

High Performance CDI Box
  • Enhanced timing curve, increased rev limiter
  • Higher grade of electronic components.
  • The Quality exceeds the OEM equipment
External ignition coil
  • Highest grade lamination materials.
  • The Quality exceeds the OEM equipment
  • Spark plug cap(s) included

If your old parts are defective, RM Stator offer replacements parts of high qualities at a fraction of the cost of genuine parts.

Details

YOU SAVE 5% off the items price combined, when buying a kit.

Brand New Kit Stator + HP CDI Box + External Ignition Coil + Crankcase Cover Gasket

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All product shipped are tested
  • One year limited warranty
*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

Stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • Crankcase cover gasket included

High Performance CDI Box
  • Enhanced timing curve, increased rev limiter
  • Higher grade of electronic components.
  • The Quality exceeds the OEM equipment
External ignition coil
  • Highest grade lamination materials.
  • The Quality exceeds the OEM equipment
  • Spark plug cap(s) included

If your old parts are defective, RM Stator offer replacements parts of high qualities at a fraction of the cost of genuine parts.

Videos

Specifications

Stator

Interior diameter: 53 mm
Exterior diameter: 114 mm
Thickness: 13 mm

Other specifications:
Number of wires: 7
Number of plugs: 2
Number of pins: 7

Wire to wire resistance:
Alternator : White between each White = 0.4 ohms+/-20%
Pickup: Green to Blue = 518 ohms =+/-20%

Position sensor: Red to White/Blue = 0.1 ohms+/-20%


CDI Box

Height: 26mm
Length: 109mm
Width: 78mm
Wires length: 120mm

Other specifications:
Number of plugs: 2
Number of pins: 12

The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box

External ignition coil
Bracket to bracket center 55 mm

OEM # Replacement

Stator:
5FU-81410-00-00
5NF-81410-00-00

High Performance CDI Box:
5NF-85540-00-00
5YT-85540-00-00

External Ignition Coil:
5KM-82310-00-00
3KJ-82310-10-00

Crankcase Cover Gakset:
3GD-15451-00-00
1UY-15451-00-00

Fits models

Installation instructions

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

CDI Box

Our CDI may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This CDI is designed as a direct plug-in replacement and should be used as such.

External ignition coil

Remove the yellow wire from the external ignition coil, if it is not applicable to your model.

Reviews

Q&A