Kit Stator + PeakRPM CDI Box for Yamaha YFM 350 Warrior 1997-2001

$USD 287.00
Availability: In stock
SKU
RM22420
3GD-85540-40-00
Stator
Interior diameter : 53mm
Exterior diameter : 115mm
Thickness : 14mm
Length of wires stator to grommet : 150mm
Length of wires grommet to plug : 420mm
Length of pickup coil's wire to grommet : 300mm

Other specifications :
Number of wires : 7
Number of plugs : 3
Number of pins : 7

Wire to wire resistance :
Alternator : White between each White = 0.4 ohms +/-20%
Pickup : White to Red = 450 ohms +/-20%
Source : Green to Brown = 320 ohms +/-20%

HP CDI Box
Height: 27mm
Length: 142mm
Width: 95mm

Other specifications:
Number of plugs: 2
Number of pins: 14


The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box.
Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

CDI Box

Our CDI may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This CDI is designed as a direct plug-in replacement and should be used as such.

Brand New Kit Stator + PeakRPM CDI Box

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All product shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
PeakRPM CDI Box
  • Our PeakRPM CDI Box provides the optimal output for your ride
  • Higher grade of electronic components.
  • The Quality exceeds the OEM equipment
Write Your Own Review
You're reviewing:Kit Stator + PeakRPM CDI Box for Yamaha YFM 350 Warrior 1997-2001
Your Rating
Customers Also Viewed
Currently there is no product to display.