Menu

Canada Canadian Customer?  Go to our Canadian Store

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (US$0.00)

X

You are currently searching with filters

Kit High Output Stator + High Performance CDI Box For Honda TRX 250 R 1988-1989

RM22973
RMSTATOR

Kit High Output Stator + High Performance CDI Box For Honda TRX 250 R 1988-1989

RM22973
RMSTATOR

Availability: In stock

Price: US$188.10

OR
YOU SAVE 5% off the items price combined, when buying a kit.

Brand New Kit High Output 200W Stator + High Performance CDI Box

  • Direct replacement to your original unit
  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

High output stator 200 watts
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • Back Plate included

20% More output over stock, works with all other OEM components.

High Performance CDI Box
  • Enhanced timing curve, increased rev limiter (approximately 1000 rpm)
  • Higher grade of electronic components.
  • The Quality exceeds the OEM equipment

Details

YOU SAVE 5% off the items price combined, when buying a kit.

Brand New Kit High Output 200W Stator + High Performance CDI Box

  • Direct replacement to your original unit
  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

High output stator 200 watts
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • Back Plate included

20% More output over stock, works with all other OEM components.

High Performance CDI Box
  • Enhanced timing curve, increased rev limiter (approximately 1000 rpm)
  • Higher grade of electronic components.
  • The Quality exceeds the OEM equipment

Videos

Specifications

High Ouptut Stator :
Interior diameter : 34mm
Exterior diameter : 88mm
Thickness : 17mm
Length of wires stator to grommet : 60mm
Length of wires grommet to plug : 60mm & 620mm
Length of pickup coil's wire to grommet : 80mm

Other specifications :
Number of wires : 4
Number of plugs : 3
Number of pins : 4

Wire to wire resistance :
Alternator : White to Ground = 04.4 ohms +/-20%
Pickup : Green to Blue = 115 ohms +/-20%
Source : Black/Red to Ground = 210 ohms +/-20%

CDI Box
Height: 25mm
Length: 80mm
Width: 49mm

Other specifications:
Number of plugs: 2
Number of pins: 6

The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box.

OEM # Replacement

High Output Stator
31120-HA2-671

CDI Box HP
30410-HB9-770

Fits models

Installation instructions

Before installing your new stator:
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code then youメre original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010メメ.

CDI box
Our CDI may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This CDI is designed as a direct plug-in replacement and should be used as such.

Reviews

Q&A