Menu

Canada Canadian Customer?  Go to our Canadian Store

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (US$0.00)

X

You are currently searching with filters

Kit High Output Stator + External Ignition Coil For Yamaha YFM 350 Raptor / Warrior YFM 400 Big Bear 2000-2013

RM22809
RMSTATOR

Kit High Output Stator + External Ignition Coil For Yamaha YFM 350 Raptor / Warrior YFM 400 Big Bear 2000-2013

RM22809
RMSTATOR

Availability: In stock

Price: US$188.10

OR
YOU SAVE 5% off the items price combined, when buying a kit.

Brand New Kit High Output Stator + External Ignition Coil

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All product shipped are tested
  • One year limited warranty
  • All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
High Output Stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included

20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.

External Ignition Coil
  • You must re-install your OEM spark plug cap(s).
  • Once your OEM spark plug cap(s) are re-installed, our part becomes a Plug-and-play unit, direct fit, and easy to install..
  • Highest grade lamination materials.

Details

YOU SAVE 5% off the items price combined, when buying a kit.

Brand New Kit High Output Stator + External Ignition Coil

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All product shipped are tested
  • One year limited warranty
  • All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
High Output Stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included

20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.

External Ignition Coil
  • You must re-install your OEM spark plug cap(s).
  • Once your OEM spark plug cap(s) are re-installed, our part becomes a Plug-and-play unit, direct fit, and easy to install..
  • Highest grade lamination materials.

Videos

Specifications

Dimensions Stator :
Interior diameter: 53 mm
Exterior diameter: 114 mm
Thickness: 13 mm

Other specifications:
Number of wires: 7
Number of plugs: 2
Number of pins: 7

Wire to wire resistance:
Alternator : White between each White = 0.4 ohms+/-20%
Pickup: Green to Blue = 518 ohms =+/-20%
Position Sensor: Red to White/Blue = 0.1 ohms+/-20%

Dimensions External Ignition Coil :
Distance between fixation holes: 60 mm

OEM # Replacement

HO Stator:
5FU-81410-00-00
5NF-81410-00-00

External Ignition Coil:
5M0-82310-M0-00
3NS-82310-01-00

Fits models

Installation instructions

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

External ignition coil
Remove spark plug cap(s) from your OEM external ignition coil.
Screw cap(s) on the new external ignition coil.
Remove the yellow wire from external the ignition coil, if it is not applicable to your model.

Reviews

Q&A