Menu

Canada Canadian Customer?  Go to our Canadian Store

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (US$0.00)

X

You are currently searching with filters

High Performance CDI Box For Polaris Predator 50 Scrambler 50 2003-2006

RM02172
RMSTATOR

High Performance CDI Box For Polaris Predator 50 Scrambler 50 2003-2006

RM02172
RMSTATOR

Availability: In stock

Price: US$89.00

OR

Brand new high performance CDI box

  • Our part is a Plug-and-play unit, direct fit, and easy to install.
  • Enhanced timing curve, increased rev limiter (approximately 1000 rpm)
  • Higher grade of electronic components.
  • The Quality exceeds the OEM equipment
  • All products shipped are tested
  • One year limited warranty

All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

Details

Brand new high performance CDI box

  • Our part is a Plug-and-play unit, direct fit, and easy to install.
  • Enhanced timing curve, increased rev limiter (approximately 1000 rpm)
  • Higher grade of electronic components.
  • The Quality exceeds the OEM equipment
  • All products shipped are tested
  • One year limited warranty

All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

Specifications

Dimensions:
Height: 25mm
Length: 65mm
Width: 55mm

Other specifications:
Number of plugs: 1
Number of pins: 5

Please note that: The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box.

OEM # Replacement

0451021

Fits models

Installation instructions

  • Our CDI may use a different wire color code then your original.
  • All of the wires are installed in the correct order; please do not change any of the wiring configurations.
  • This CDI is designed as a direct plug-in replacement and should be used as such.

* Please note : If your OEM CDI box does not have a blue wire, simply tape it to hold it in place. The purpose of this blue wire is to limit the speed of the the vehicle when in reverse. If the OEM CDI has this wire, you will need to install it as the original one was.

If you come across an issue in which the vehicle is not going fast enough (high revolutions), disable the speed control & remove the bridge clip between the 2 screws on the back of the CDI unit.

We always suggest taking photos of your OEM parts before uninstalling them so that you may install your parts in the same fashion.

Videos

Reviews

Q&A