Menu

Canada Canadian Customer?  Go to our Canadian Store

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (US$0.00)

X

You are currently searching with filters

High Output Stator For Yamaha YFZ 450 2004-2009 2012-2013

RM01331
RMSTATOR

High Output Stator For Yamaha YFZ 450 2004-2009 2012-2013

RM01331
RMSTATOR

Availability: In stock

Price: US$159.00

OR

Customer who bought this product also bought:


Brand new high output stator

  • Direct replacement to your original unit
  • Pick up pulsar coil included
  • Connector included
  • Opposite connector included
  • Rubber grommet included
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • All products shipped are tested
  • One year limited warranty

20% More output over stock, works with all other OEM components.

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Details

Brand new high output stator

  • Direct replacement to your original unit
  • Pick up pulsar coil included
  • Connector included
  • Opposite connector included
  • Rubber grommet included
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • All products shipped are tested
  • One year limited warranty

20% More output over stock, works with all other OEM components.

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Videos

Specifications

Dimensions:
Interior diameter: 30mm
Exterior diameter: 85mm
Thickness: 10mm
Length of wires stator to grommet: 180mm
Length of wires grommet to plug: 700mm
Length of pickup coil's wire to grommet: 90mm

Other specifications:
Number of wires: 4
Number of plugs: 2
Number of pins: 4

Wire to wire resistance:
Alternator: White to Yellow = 0.4ohms +/-20%
Pickup: White to Red = 275ohms =+/-20%

OEM # Replacement

5TG-81410-00-00
5TG-81410-01-00
5TG-81410-02-00
5TG-81410-03-00
5TG-81410-10-00

Fits models

Installation instructions

Before installing your new stator:
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code then youメre original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010メメ.

Reviews

Q&A